Supervisory General Engineer (GS-14)

Summary

This position is with the U. S. Department of Labor, Occupational Safety and Health Administration (OSHA) in the Directorate of Technical Support and Emergency Management (DTSEM), in the OSHA Technical Center, Engineering Support Division, located in Sandy, UT. This position is at the full performance level. This position is outside the bargaining unit. This position is NOT remote. Selectee will be required to report to the office listed above.

Duties

Major duties of the Supervisory General Engineer position include, but are not limited to, the following: Operating laboratory and testing functions under a total quality system with standard operating procedures. Overseeing, developing and/or modifying complex systems for calibrating equipment used to measure hazardous conditions in occupational environments such as but not limited to air velocity meters, air sampling pumps, gas monitors, and the like. Designing or overseeing the design of testing protocols for both field and internal laboratory equipment; periodically reviewing national regulatory standards and reviewing Commission decisions to determine adequacy of field equipment to enforce OSHA standards. Performing the full range of supervisory responsibilities such as assigning and reviewing work of subordinates, approving personnel actions, developing position descriptions and making selections for vacancies. Developing performance standards and appraises employees on their performance. Participating in national regulatory standards setting groups which are developing standards that are related to and/or affect OSHA's instrumentation needs.

Qualifications

THE ENGINEER SERIES HAS AN INDIVIDUAL OCCUPATIONAL REQUIREMENT. ALL APPLICANTS MUST MEET THIS REQUIREMENT IN ORDER TO BE CONSIDERED. You must meet the "Individual Occupational Requirement" and the "Specialized Experience" as described below, to qualify for the Electronics Engineer position. *You MUST provide transcripts with your application package. Official transcripts will be required before time of hire. INDIVIDUAL OCCUPATIONAL REQUIREMENT (IOR): A. Degree: Bachelor's degree (or higher degree) in engineering. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher degree) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); OR (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. OR B. Combination of Education and Experience: College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering. The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure - Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration. For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2. Written Test - Evidence of having successfully passed the Fundamentals of Engineering (FE) examination, or any other written test required for professional registration, by an engineering licensure board in the various States, the District of Columbia, Guam, or Puerto Rico. 3. Specified academic courses - Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in A above. The courses must be fully acceptable toward meeting the requirements of an engineering program. 4. Related curriculum - Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. In addition to meeting the Individual Occupational Requirement (IOR), applicants must meet the following specialized experience:Specialized Experience: Specialized Experience is experience that has equipped the applicant with the knowledge, skills, and abilities to successfully perform the duties of the position, and that is typically in or related to the work of the position to be filled. At the GS-14: Applicants must have at least 52 weeks of Specialized Experience equivalent to the GS-13 or higher, to qualify for this position. For this position, specialized experience is defined as: Using OSHA regulations, American National Standards Institute (ANSI) or similar recommended standards and procedures for testing and/or calibration of electronic systems. Developing innovative methods and techniques for evaluating hazards involving unusual or new work processes, operations, equipment and/or materials. Providing technical assistance/guidance in conducting studies and investigations of hazards and accidents. Performing forensic investigations for industrial accidents and catastrophes by providing engineering support to address industrial hygiene issues. NOTE: In describing your experience, please be clear and specific. We will not make assumptions regarding your experience.

Education

Any applicant falsely claiming an academic degree from an accredited school will be subject to actions ranging from disqualification from federal employment to removal from federal service. If your education was completed at a foreign college or university, you must show comparability to education received in accredited educational institutions in the United States and comparability to applicable minimum course work requirements for this position. Click Evaluation of Foreign Education for more information.

How you will be evaluated

Applicants meeting the eligibility and minimum qualification requirements will be referred to the selecting official. Rating/ranking and veterans' preference does not apply to this position. You may preview application questions for this vacancy here: https://apply.usastaffing.gov/ViewQuestionnaire/13100795 The information you provide may be verified by a review of your paid, unpaid, volunteer, as it demonstrates the competencies or skills required for the position to be filled. Your evaluation may include an interview, reference checks, or other assessment conducted by HR specialists, subject matter experts, or panel members and may include other assessment tools (ex. interview, structured interview, written test, work sample, etc.). USA Hire You will be assessed on the following competencies (knowledge, skills, abilities, and other characteristics): Accountability Customer Service Decisiveness Flexibility Interpersonal Skills Problem Solving Resilience The USA Hire Assessments includes a cut score based on the minimum level of required proficiency in these critical general competencies. You must meet or exceed the cut score to be considered. You will not be considered for the position if you score below the cut score or fail to complete the assessment. Under the authority of direct hire recruitment, evaluation factors are a tool to gauge one's proficiency in relevant competencies, but will not be used to determine who will be referred to the hiring manager for consideration. All candidates who have provided a complete application, and meet the minimum qualification requirements will be referred for consideration. INFORMATION FOR ICTAP/CTAP ELIGIBLE(S) ONLY: If you are eligible for special priority selection under ICTAP/CTAP, you must meet the basic and minimum qualification requirements for this position to receive consideration. Be sure to review the eligibility questions to reflect that you are applying as an ICTAP or CTAP eligible and submit supporting documentation. You may not be aware, but in the regulations for agency ethics programs, there are requirements for supervisors. Section 2638.103 of Title 5 of the CFR states: Every supervisor in the executive branch has a heightened personal responsibility for advancing government ethics. It is imperative that supervisors serve as models of ethical behavior for subordinates. Supervisors have a responsibility to help ensure that subordinates are aware of their ethical obligations under the Standards of Conduct and that subordinates know how to contact agency ethics officials. Supervisors are also responsible for working with agency ethics officials to help resolve conflicts of interest and enforce government ethics laws and regulations, including those requiring certain employees to file financial disclosure reports. In addition, supervisors are responsible, when requested, for assisting agency ethics officials in evaluating potential conflicts of interest and identifying positions subject to financial disclosure requirements.

How to apply

Persons who are deaf, hard of hearing, blind, or have speech disabilities, please dial 711 to access telecommunications relay services. To apply for this position, you must complete the initial online application, including submission of the required documentation specified in the Required Documents section. Your application and ALL required supplemental documents MUST be received by 11:59 pm Eastern Time on the vacancy closing date to receive consideration. Important - Save your information before the 30 minute system timeout! For help, go to USAJOBS Help Center. STEP 1 - Create USAJOBS Account on www.usajobs.gov, including Resume and Saved Documents. For each employment period, include start/end month & year and note full-time or part-time (if part-time, include # of hours worked per week) otherwise, your application may be considered incomplete. STEP 2 - Complete the 1st part of the application process (USAJOBS). Once you have identified a job on USAJOBS that you wish to apply for, click on the job title and then click the Apply button. For questions about the vacancy, contact the Agency Contact at the bottom of the announcement. Proceed through the steps noted at the top of the USAJOBS page. You will be able to select a resume and documents from your USAJOBS Account that you can submit as a package as part of your DOL application. In the final step, once you have certified your application, click the Continue to agency site button. STEP 3 - Complete the 2nd part of the application process (DOL). On the Department of Labor (DOL) page, create a DOL Account if you have not already and click Apply to this vacancy. Continue through the progress steps at the top of the DOL page. The 2nd progress step is where you answer the vacancy-specific questions. The 3rd progress step Documents is where you submit the required documents (only if applicable to you) specified in the Required Documents section of this vacancy. STEP 4 - On the Review and Submit step, verify each section of your application is complete and correct. In order to submit your application, you must have a check mark next to each section listed. If there is an X, return to the appropriate section and follow the prompts. When it is ready for submission, certify your application and click the Submit Application button. STEP 5 - Edit Application as needed by 11:59 pm Eastern Time of Closing Date by returning to USAJOBS, clicking the vacancy, then Update Application. If you are required to complete any USA Hire Assessments, you will be notified after submitting your application. The notification will be provided in your application submission screen and via email. The notification will include your unique assessment access link to the USA Hire system and the completion deadline. Additionally, in USAJOBS you can click "Track this application" to return to your assessment completion notice. Access USA Hire using your unique assessment link. Access is granted through your USAJOBS login credentials. Review all instructions prior to beginning your assessments. You will have the opportunity to request a testing accommodation before beginning the assessments should you have a disability covered under the Rehabilitation Act of 1973 as amended. Set aside about 2 hours to take the USA Hire assessment; however, most applicants complete the assessments in less time. If you need to stop the assessments and continue later, you can re-use your unique assessment link. Your responses to the USA Hire Assessments will be reused for one year (in most cases) from the date you complete an assessment. If future applications you submit require completion of the same assessments, your responses will be automatically reused. Visit the USA Hire Applicant Resource Center for practice assessments and assessment preparation resources at https://support-usahire.opm.gov/hc/en-us. To update your application, including supporting documentation: During the announcement open period, return to your USAJOBS account, find your application record, and click Edit my application. This option will no longer be available once the announcement has closed. To view the announcement status or your application status: Visit https://www.usajobs.gov/Help/howto/application/status/. Your application status page is where you can view your application status, USA Hire assessment completion status, and review your notifications sent by the hiring agency regarding your application. NOTE: It is your responsibility to ensure your responses and appropriate documentation is submitted prior to the closing date. For more detailed information on applying for positions with DOL click here to view the U.S. Department of Labor, How to Apply website.

Other information

This position is being filled through the Direct Hire Authority. Traditional rating and ranking of applications does NOT apply. Veterans' preference does not apply. The mission of the Department of Labor (DOL) is to protect the welfare of workers and job seekers, improve working conditions, expand high-quality employment opportunities, and assure work-related benefits and rights for all workers. Refer to these links for more information: GENERAL INFORMATION, REASONABLE ACCOMMODATION, ADDITIONAL DOCUMENTATION, FORMER FEDERAL EMPLOYEES As a condition of employment, all personnel must undergo a background investigation for access to DOL facilities, systems, information and/or classified materials before they can enter on duty: BACKGROUND INVESTIGATION Click here for Telework Position Information. This is not a remote work position. The selectee will report to an assigned DOL office location on a regular basis and is eligible for participation in telework as determined by management in accordance with DOL policy. Based on agency needs, additional positions may be filled using this vacancy. The Department of Labor may use certain incentives and hiring flexibilities, currently offered by the Federal government to attract highly qualified candidates. Click here for Additional Information. The Fair Chance Act (FCA) prohibits Federal agencies from requesting an applicant's criminal history information before the agency makes a conditional offer of employment. If you believe a DOL employee has violated your rights under the FCA, you may file a complaint of the alleged violation following our agency's complaint process Guidelines for Reporting Violations of the Fair Chance Act. Note: The FCA does not apply to some positions specified under the Act, such as law enforcement or national security positions. All Department of Labor employees are subject to the provisions of the Drug-Free Workplace Program under Executive Order 12564 and Public Law 100-71. Reasonable Accommodation (RA) Requests: If you believe you have a disability (i.e., physical or mental), covered by the Rehabilitation Act of 1973 as amended that would interfere with completing the USA Hire Competency Based Assessments, you will be granted the opportunity to request a RA in your online application. Requests for RA for the USA Hire Competency Based Assessments and appropriate supporting documentation for RA must be received prior to starting the USA Hire Competency Based Assessments. Decisions on requests for RA are made on a case-by-case basis. If you meet the minimum qualifications of the position, after notification of the adjudication of your request, you will receive an email invitation to complete the USA Hire Competency Based Assessments, based on your adjudication decision. You must complete all assessments within 48 hours of receiving the URL to access the USA Hire Competency Based Assessments if you received the link after the close of the announcement. To determine if you need a RA, please review the Procedures for Requesting a Reasonable Accommodation for Online Assessments.