Manufacturing Test Engineer, Embedded Software
Knightscope
Sunnyvale, CA · Posted October 14, 2026
Just laid off? Start here: a plan for the first weeks
See every open role at Knightscope
More in California job market · Technology & Software · Engineering jobs
More roles at Knightscope
- Senior Embedded Software Engineer · Sunnyvale, CA
- Senior Audio/Video Engineer · Sunnyvale, CA
- Staff ML Engineer, Autonomy & Planning · Sunnyvale, CA
- Staff Perception Engineer – Robotics · Sunnyvale, CA
- Senior Full Stack Engineer · Sunnyvale, CA
- Full Stack Engineer · Sunnyvale, CA
Similar jobs
- Manufacturing Engineer - Motors · Joby Aviation · San Carlos, CA
- Senior Manufacturing Design Engineer · Uber · Sunnyvale, CA
- Manufacturing Engineer - Optics · Voyager Technologies · San Diego, CA
- Manufacturing Engineer · Northwood Space · Torrance, CA
- Manufacturing Engineer, Machining & Additive Associate (Winter 2027) · Astranis · San Francisco, CA
- Manufacturing Engineer · Psiquantum · Milpitas, CA
Where Sunnyvale, CA ranks
Where Sunnyvale, CA placed in our monthly rankings, month by month. Each month stays online at its own address.
November 2026
- #3Best cities for consumer and retail pay after cost of living$117k · of 13
- #4Best cities for operations pay after cost of living$151k · of 41
- #5Best cities for pay after cost of living$189k · of 100
- #5Best all-round cities for AI careers90 / 100 · of 100
- #5Best all-round cities for AI careers in the West Coast81 / 100 · of 35
- #6Best all-round cities for mid-career professionals in the West Coast68 / 100 · of 35
Rankings about engineering jobs
- Best cities for software and engineering jobs #1 San Francisco (3,732 openings)
- Best cities for engineering pay after cost of living #1 San Mateo ($163k)
- Most requested AI skills in engineering jobs #1 AI tools in daily work (6.1%)
- AI tools named most often in engineering jobs #1 Claude (1.7%)
- Employers with the most engineering jobs #1 Amazon (2,360 roles)
How AI is used in this kind of work
AI use among industrial engineers is little observed so far. Measured exposure for industrial engineers: 4% (little observed).
Share of this job’s tasks that AI is already used for at work, from real usage. It is not a forecast of job loss, and a low number means no use seen yet. Source: Anthropic Economic Index.
Skills this job asks for
Say which you have and which you want to build. We use it to match you to jobs like this one.
About the job
About Knightscope
Knightscope (NASDAQ: KSCP) is a security technology company building the nation's first Autonomous Security Force — autonomous machines, AI-driven software, and elite security professionals operating as one integrated managed service. The Company is on a mission to make the United States of America the safest country in the world. One Team. One Force.
The Role
We are looking for a hands-on engineer to write the software that tests, calibrates, and releases every K7 vehicle that comes off our production line. This is primarily a software development role: you will design and write the test framework, station software, and embedded interfaces yourself, rather than configuring or maintaining an off-the-shelf test system.
The software will talk directly to K7 embedded hardware: controllers, sensors, and onboard compute. It will verify each subsystem, calibrate sensors, load and check firmware and software images, and enforce the factory gates that keep a unit from shipping until it passes.
Location - Sunnyvale, CA - Onsite
Starting Point
You will build the K7 end-of-line test software from the ground up: defining what gets tested and how, learning the hardware and firmware in detail, and designing the framework and station software yourself. You will work closely with hardware, firmware, autonomy, and manufacturing teams, and with the technicians who run the stations. We use modern tools, including AI assistants, as part of everyday development.
What You Will Do
Develop the test software: Design and write the EOL test framework and station software from the ground up, including test sequencing, hardware drivers, logging, and pass/fail limits.
Work with embedded systems: Communicate with vehicle controllers and onboard compute over standard interfaces (e.g., CAN, Ethernet, serial); write low-level tools and utilities to exercise and verify embedded hardware and firmware.
Build factory software gates: Flash firmware and software images, verify versions and configuration, and enforce pass/fail criteria so every unit is released in a known, approved state.
Develop sensor calibration: Implement calibration routines for vehicle sensors such as cameras, LiDAR, and IMUs, including target setup, algorithms, and acceptance limits.
Create traceability: Log serial numbers, calibration data, and test results to a central database, and build reports on yield, failure modes, and station performance.
Build operator tools: Create simple, reliable station interfaces that production technicians can run with minimal training.
Support the line: Debug test failures on the floor down to the hardware, firmware, or software level, and work with the owning teams on root cause.
Maintain the codebase: Use version control, code review, and automated testing; write test specifications and work instructions.
Required Qualifications
Bachelor’s degree in computer science, Electrical, Robotics, or Controls Engineering, Computer Science, or equivalent experience.
5+ years of software development for hardware test, manufacturing test, or embedded systems on vehicles, robots, or complex electromechanical products.
Track record of designing and writing test software or tooling from scratch, not only maintaining existing systems.
Strong Python for test automation and tooling; solid C or C++ for embedded and hardware-facing code.
Hands-on embedded experience: microcontrollers and/or embedded Linux, firmware flashing and bootloaders, and debugging with tools such as JTAG/SWD debuggers, logic analyzers, and oscilloscopes.
Working knowledge of hardware interfaces and protocols such as CAN/CAN-FD, Ethernet, USB, UART, SPI, and I2C.
Experience controlling test instruments programmatically (e.g., via SCPI).
Ability to read electrical schematics and wiring diagrams.
Software engineering fundamentals: Git, code review, and automated testing.
Effective, everyday use of AI assistants (e.g., Claude) for coding, debugging, and research: writes clear, well-scoped prompts, breaks problems into steps, and critically checks AI output before it reaches production or hardware.
Preferred Qualifications
Experience calibrating cameras, LiDAR, IMUs, or other sensors in a production environment.
Experience with automotive diagnostics (UDS, OBD) and end-of-line flashing.
Experience with RTOS-based firmware or Linux device drivers.
Background in autonomous vehicles, mobile robotics, EVs, or automotive Tier-1 suppliers.
Experience with ROS/ROS 2, test frameworks (e.g., pytest, OpenHTF), MES, or test databases.
What Success Looks Like
Test coverage: Automated EOL tests and software release gates that the production team relies on for every unit.
Calibration and traceability: reliable sensor calibration, with every unit traceable by serial number to its test and calibration records.
Continuous improvement: A documented, measurable EOL process with tracked yield and cycle time, and a clear feedback loop into engineering.
Compensation and Benefits
Base Salary: $150,000 - $185,000
Equity: Stock options
Benefits: Medical, dental, vision, 401(k), paid time off
Location Requirement: Full-time, on-site at Sunnyvale HQ