← Search all jobs

Technical Project Manager

Chenega

Listing collected from Chenega's career site. NextChapter is independent of Chenega.

Fort Gillem, GA · Posted November 16, 2026

Will your résumé get you an interview here?

Drop your résumé and see in seconds how well it matches what Chenega asks for. Free, no account needed.

Just laid off? Start here: a plan for the first weeks

See every open role at Chenega

More in Georgia job market · All Technical Project Manager jobs (110) · Transportation & Logistics · Engineering jobs

More roles at Chenega

Similar jobs

Engineering jobs in the rankings

How AI is used in this kind of work

Among computer occupations, all other, AI is already used for a large share of the tasks. Measured exposure for computer occupations, all other: 31% (high).

Share of this job’s tasks that AI is already used for at work, from real usage. It is not a forecast of job loss, and a low number means no use seen yet. Source: Anthropic Economic Index.

Check how this applies to your own job

Skills this job asks for

Say which you have and which you want to build. We use it to match you to jobs like this one.

About the job

Summary

The Technical Project Manager applies advanced technical knowledge to problem solve mid-level to complex system related problems while maintaining industry best practices. Typically work requires an understanding of the various types of access control, video management, CCTV camera, and intrusion detection systems. The TPM must have the ability to exercise independent judgment in performing such tasks, as installing devices, updating firmware and software, programming systems, troubleshooting issues, and connecting to network switches. The TPM is responsible for the status reporting, financial tracking, scheduling and all project correspondence and documentation. The TPM will ensure all projects are delivered in adherence to project scope, schedules, and budget. In this role the TPM will communicate with the Contracting Officer Representative (COR) Supervisors and Team Members frequently regarding the overall performance and status of all assigned projects.

Responsibilities

Has a Mastery skill sets of the requirements of a technician level one, two, and three with advanced working knowledge and understanding of ACS/IDS hardware, intrusion detection, CCTV equipment, local and national code; i.e. ADA, NEC, NFPA-72, IBC. To include basic design and engineering skill sets at a minimum.

Have a working knowledge and understanding of low voltage electronic principals

Possess the ability to use diagnostic equipment/software and established troubleshooting techniques to isolate network deficiencies, equipment failures and operational anomalies

Ability to read, interpret electrical and electromechanical schematics and architectural drawings

Reading and adhering to blueprints and installation design plans for the installation of sub-level devices (i.e. patch panels, junction boxes) and head end equipment

Reading and understanding component level schematic diagrams for systems, equipment and devices

Identifying appropriate cables from drawings and running cables/fiber per installation design plans

Repairing and maintaining electronic security system equipment

Understanding the infrastructure relationships between trades

Testing continuity of conductor(s) or breaks in fiber

Performing field verification testing

Ability to troubleshoot /solve issues and coordinate with other trades and clients

Expertise with maintenance management systems as identified by Chenega or the facility

Plan and manage project scope, schedules and budget

Manage all project resources

Procure and track project materials

Demonstrate ability to work independently

Identify and manage project risks

Attend and facilitate required meetings, conferences, and working groups

Provide effective mentoring, counseling, and discipline for all Team Members

Communicate effectively with all project stake holders

Demonstrate effective oral and written communication

Maintain a complete and thorough knowledge of the task order , the contract and all contract modifications affecting the task order.

Maintain a complete and thorough knowledge of contract requirements regarding project management.

Adhering to all Company and Client policies and procedures

Must participate in all company described training programs as required.

Supervise lower-level technician(s).

Other duties as assigned

Qualifications

At least ten years’ field experience in commercial/industrial (non-residential electronics installation & troubleshooting) is required with a high school degree; Or

At least seven years’ field experience coupled with graduation from an Electronics Training Program or Graduation from an Accredited Electronic Apprentice Program with a high school degree; Or

At least five years’ field experience with an AA/AS in Electronics from an accredited program; OR

At least three years of field experience with a BS/BA in Electronics from an accredited program.

Multiple ACS/IDS, CCTV platforms, i.e. Software House and C-CURE, Lenel, MDI, BOSCH, DMP or as required.

Active certifications from the following OEM’s desired: Lenel, Hirsch, Bosch, DMP, MDI, Delta Vehicle Barrier; Bosch CCTV Systems; IP CCTV Systems; Alverado Turnstiles; Network + certification or equivalent OEM certifications not listed.

Ability to install a variety of ESS systems and devices to include but not limited to ACS/IDS, CCTV, VMS, Intercom, Blue light, Card Access Readers, Keypads, Door Contacts, Motion/Glassbreak Sensors, Electronic Locking Hardware, Request to Exit Devises, and Cameras

Secret clearance required.

Successfully pass background and drug screening

Knowledge, Skills and Abilities:

Skilled in operating a personal computer and standard office equipment.

Must have knowledge of a variety of computer software applications in word processing, spreadsheets, database, (MSWord, Excel, Access, PowerPoint), and Outlook.

Physical Demands: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)

Sufficient fine motor skill for use of computers, calculator with an ability to withstand repetitive keyboarding for extended periods of time

Visual, auditory and communication abilities sufficient to perform the essential functions of the job

Ability to kneel bend and twist at the waist on an occasional basis,

Ability to push, pull, carry and lift objects weighing up to 20 pounds on a regular basis and more on an occasional basis

Ability to travel by plane and safely operate a motor vehicle

Work Environment: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.)

The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment.

During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise.

Has a Mastery skill sets of the requirements of a technician level one, two, and three with advanced working knowledge and understanding of ACS/IDS hardware, intrusion detection, CCTV equipment, local and national code; i.e. ADA, NEC, NFPA-72, IBC. To include basic design and engineering skill sets at a minimum.

Have a working knowledge and understanding of low voltage electronic principals

Possess the ability to use diagnostic equipment/software and established troubleshooting techniques to isolate network deficiencies, equipment failures and operational anomalies

Ability to read, interpret electrical and electromechanical schematics and architectural drawings

Reading and adhering to blueprints and installation design plans for the installation of sub-level devices (i.e. patch panels, junction boxes) and head end equipment

Reading and understanding component level schematic diagrams for systems, equipment and devices

Identifying appropriate cables from drawings and running cables/fiber per installation design plans

Repairing and maintaining electronic security system equipment

Understanding the infrastructure relationships between trades

Testing continuity of conductor(s) or breaks in fiber

Performing field verification testing

Ability to troubleshoot /solve issues and coordinate with other trades and clients

Expertise with maintenance management systems as identified by Chenega or the facility

Plan and manage project scope, schedules and budget

Manage all project resources

Procure and track project materials

Demonstrate ability to work independently

Identify and manage project risks

Attend and facilitate required meetings, conferences, and working groups

Provide effective mentoring, counseling, and discipline for all Team Members

Communicate effectively with all project stake holders

Demonstrate effective oral and written communication

Maintain a complete and thorough knowledge of the task order , the contract and all contract modifications affecting the task order.

Maintain a complete and thorough knowledge of contract requirements regarding project management.

Adhering to all Company and Client policies and procedures

Must participate in all company described training programs as required.

Supervise lower-level technician(s).

Other duties as assigned

At least ten years’ field experience in commercial/industrial (non-residential electronics installation & troubleshooting) is required with a high school degree; Or

At least seven years’ field experience coupled with graduation from an Electronics Training Program or Graduation from an Accredited Electronic Apprentice Program with a high school degree; Or

At least five years’ field experience with an AA/AS in Electronics from an accredited program; OR

At least three years of field experience with a BS/BA in Electronics from an accredited program.

Multiple ACS/IDS, CCTV platforms, i.e. Software House and C-CURE, Lenel, MDI, BOSCH, DMP or as required.

Active certifications from the following OEM’s desired: Lenel, Hirsch, Bosch, DMP, MDI, Delta Vehicle Barrier; Bosch CCTV Systems; IP CCTV Systems; Alverado Turnstiles; Network + certification or equivalent OEM certifications not listed.

Ability to install a variety of ESS systems and devices to include but not limited to ACS/IDS, CCTV, VMS, Intercom, Blue light, Card Access Readers, Keypads, Door Contacts, Motion/Glassbreak Sensors, Electronic Locking Hardware, Request to Exit Devises, and Cameras

Secret clearance required.

Successfully pass background and drug screening

Knowledge, Skills and Abilities:

Skilled in operating a personal computer and standard office equipment.

Must have knowledge of a variety of computer software applications in word processing, spreadsheets, database, (MSWord, Excel, Access, PowerPoint), and Outlook.

Physical Demands: (The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.)

Sufficient fine motor skill for use of computers, calculator with an ability to withstand repetitive keyboarding for extended periods of time

Visual, auditory and communication abilities sufficient to perform the essential functions of the job

Ability to kneel bend and twist at the waist on an occasional basis,

Ability to push, pull, carry and lift objects weighing up to 20 pounds on a regular basis and more on an occasional basis

Ability to travel by plane and safely operate a motor vehicle

Work Environment: (The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job.)

The employee will normally work in a temperature-controlled office environment, with frequent exposure to electronic office equipment.

During visits to areas of operations, may be exposed to extreme cold or hot weather conditions. Is occasionally exposed to fumes or airborne particles, toxic or caustic chemicals, and loud noise.